Chromatography Tubing
Analytical Sales & Services PEEKsil Fused Silica Lined PEEK Tubing, 2pk
PEEKsil Fused Silica Lined PEEK, Pack/2.
Analytical Sales & Services SS Tubing 1/16" OD - 0.02" ID x 5', Yellow
This item has a minimum order quantity of 2 per supplier requirements. SS TUBING .020 X 5 YELLOW
Optimize Technologies 1/16" OD x .030" ID x 6cm Stainless Steel Tubing
Optimize's stainless steel tubing is pre-cut, micro polished, seamless, guarantees square/burr-free ends, and is passivated prior to shipment. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies 1/16" OD x .030" ID x 10ft ETFE Tubing
Optimize's ETFE tubing maintains excellent chemical resistance, withstands aqueous pressures up to 4,000psi and is available in both 1/8" and 1/16" Ods. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies .100" OD x .040" ID x 10ft PTFE Tubing, Natural
Optimize's PTFE tubing is chemically inert to most solvents, easy to cut, translucent for easy monitoring and recommended for general low pressure applications. The tubing is also available in various OD and ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies 1/16" OD x .040" ID x 10ft PEEK Tubing
Optimize's PEEK tubing is biocompatible and chemically inert to most commonly-used solvents and can withstand pressures up to 6,000 psi. It remains a great alternative to stainless steel tubing for high pressure applications, withstands continuous use at HPLC pressure without swelling or bursting, its not affected by aggressive mobile phases and will not corrode. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies 1/16" OD x .040" ID x 10ft PTFE Tubing, Natural
Optimize's PTFE tubing is chemically inert to most solvents, easy to cut, translucent for easy monitoring and recommended for general low pressure applications. The tubing is also available in various OD and ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Optimize Technologies OPTI-LOK™ I, PEEK
OPTI-LOK™ Fittings are ideal for high-pressure connections with 1/16” OD tubing. All Optimize fittings are precision machined for optimal quality and thread consistency and are designed for trouble-free operation at pressures of up to 6,000 psi.
Optimize Technologies 1/8" OD x .062" ID x 10ft PTFE Tubing, Natural
Optimize's PTFE tubing is chemically inert to most solvents, easy to cut, translucent for easy monitoring and recommended for general low pressure applications. The tubing is also available in various OD and ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
TRAJAN SCIENTIFIC AMERICAS INC IDEX PEEK RED TUBING-1/16X.005
50-187-1273 IDEX PEEK RED TUBING-1/16X.005
Leap PAL Parts Idex Tefzel(ETFE) Tubing, 1/8"" OD X 0.093"" ID, 100 FT
Tefzel(ETFE) Tubing, Idex, 1/8" OD X 0.093" ID, 100 FT
Leap PAL Parts Idex PFA tubing, natural, 1/8 X 1/16, 50 feet, 500 psi
PFA Tubing, Idex, natural, 1/8 x 1/16, 50 feet, 500 psi
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Taper Inlet Liner with Wool for Splitless Inlets
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Taper Splitless Liner
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.